Single-Layer Steel
An affordable, non-insulated option best suited for detached garages or spaces where temperature control is not a priority.
Steel garage door installation in Chevy Chase usually means a door painted to match the trim on a brick house near Ashland Park. On a Craftsman front, carriage-style steel panels follow the character of the house.
Near Ashland Park, we paint new steel garage doors to match the trim on Chevy Chase homes.
Steel Doors Explained
A steel garage door is built from galvanized steel sections that roll up on tracks, balanced by springs sized to the door’s weight. Steel is strong, holds a factory finish with little upkeep, and comes in raised-panel, long-panel, carriage and flush designs.
The biggest decision is construction. A single-layer door is one steel skin. A two-layer door adds polystyrene insulation behind the steel. A three-layer door seals insulation between two steel skins, which makes it quieter, stiffer and higher in R-value.
For homes in Louisville, Lexington and Northern Kentucky, we measure the opening, check headroom and the existing opener, then install, balance and safety-test the new steel door.
Strength and Insulation
An affordable, non-insulated option best suited for detached garages or spaces where temperature control is not a priority.
A durable steel exterior with added insulation for improved comfort, energy efficiency, and quieter operation.
Insulation enclosed between two steel surfaces for maximum strength, better sound control, and a clean, finished interior.
Popular Styles
A timeless design that pairs naturally with traditional, colonial, ranch, and transitional homes.
Wider panels create a clean, updated appearance while maintaining a classic residential style.
A smooth, contemporary design with optional windows that add natural light and visual interest.
Colors and Finishes
A clean, versatile choice that complements most home exteriors.
A warm neutral that pairs naturally with cream, tan, and light brick exteriors.
A soft beige-gray finish that blends well with brick, stone, and siding.
A rich architectural finish that creates warm contrast and added depth.
A bold, high-contrast option that works especially well with modern and transitional homes. Availability may vary by model.
Adds the warmth and character of wood without the maintenance requirements of a real wood door.
Trusted Brands
Amarr
Traditional steel value
Single-, double-, and triple-layer steel options with optional polystyrene insulation.
R-value: 6.48–9.05 depending on insulation thickness
View Product DetailsAmarr
High-performance insulated steel
Triple-layer steel construction with polyurethane insulation for stronger thermal performance.
R-value: 13.35–19.40 depending on insulation thickness
View Product DetailsProDoor Systems
Classic residential steel styles
Raised-panel, carriage-house, and shaker designs in non-insulated or insulated steel construction.
R-value: 0, 6.8, or 10.0 depending on construction
View Product DetailsProDoor Systems
Premium polyurethane-insulated steel
Polyurethane-insulated steel doors offered in multiple panel styles and section thicknesses.
R-value: 12 or 18 depending on section thickness
View Product DetailsBefore You Buy
An insulated door is worth considering when the garage is attached, used as a workspace, or has a living area above it.
Best for attached garages and workspaces.
Steel-backed and multi-layer doors feel more solid and generally resist daily wear better than basic single-layer doors.
Multi-layer doors resist daily wear better.
Factory finishes need little upkeep, but exposed scratches should be repaired promptly to help prevent rust.
Little upkeep. Touch up scratches early.
Compare quotes using the same insulation, windows, hardware, tracks, springs, removal, and installation—not just the door price.
Compare quotes with the same inclusions.
Plan Your New Door
Our Process
We inspect and measure your opening, available clearance, framing, floor, track area, power source, and existing opener.
We measure the opening and clearances.
We help you compare insulation levels, panel styles, colors, windows, finishes, and compatible hardware.
Compare insulation, styles and colors.
Our technicians remove your existing door and install the new panels, tracks, spring system, seals, and opener connection.
Old door out, new door and springs in.
We balance the door, adjust the opener, complete all required safety tests, and show you how to operate and care for your new system.
Balanced, safety-tested and explained.
Where High Street divides the Chevy Chase shops from Ashland Park, the houses on the residential side are mostly brick. Only a few are frame. A steel door painted to match the trim sits cleanly against that brick. On the Craftsman houses among them, carriage-style steel is often the closer match to the front.
Steel makes a practical replacement for a tired door. It resists rot and warping while needing little upkeep. Heavier gauges stand up better to knocks from bikes and car doors. An insulated core keeps an attached garage closer to indoor temperature. We fit the new door to the existing opening and connect it to your opener. On older framing, we confirm the door can hang true before it goes up. If the house falls inside the neighborhood overlay, confirm its design standards before a door is ordered.
Service area coverage
Local ZIP: 40502
Steel Door FAQ
Plan on about $1,700 to $2,900 for a common single-car door of 8 to 9 feet. A common 16-foot double-car door is about $2,000 to $4,600. Removal, framing, windows, insulation and size set the final price. Design, hardware, opener work, access and installation conditions do too.
In most cases, a standard steel replacement door goes in during a single visit. Opener work, framing changes, custom track layouts and larger doors can add time. Before the work starts, we tell you what schedule to expect.
Yes, it can. We can take out your existing garage door and haul it away with the installation. Any related cost, and what is being removed, are confirmed in the quote before work starts.
You get a one-year warranty from us on the installation labor. The door and its parts also include the applicable manufacturer’s warranty. Brand, model, finish and part all change what that warranty covers. Before any order is placed, we go over the coverage for the door you have chosen.
Your door selection and the manufacturer’s current availability set the timing. You will usually wait less for standard sizes and colors than for custom colors, windows or specialty designs. Before you commit to the order, we confirm an estimated lead time. After the entire door arrives, the installation goes on the schedule.
It is often worth insulating a door on an attached garage. The insulation slows heat and cold through the door, quiets outside noise and makes the door feel more solid. A two-layer door adds polystyrene. A three-layer door offers the highest R-values. The level to choose depends on what the garage is used for and the rooms that share a wall or ceiling with it.
Often, yes. We check its age, condition, lifting capacity and safety sensors, and its compatibility with the new door. When it runs safely and is sized for the weight of the new door, it can stay in place. If it falls short, we explain the replacement options.
Steel doors are made in the usual single-car widths of 8 and 9 feet and the usual double-car width of 16 feet. Less common openings can take other widths and heights. We measure headroom, side room, track space and the opening itself before we order, so the door fits exactly.
No-obligation quote